Escort Mk2 1.6/2.0 (OHC Pinto). Capri 2.8i / Cosworth V6. Not suitable for paper element/cartridge oil filters. FITTING KIT ONLY (NO OIL COOLER INCLUDED) - COMPATIBLE WITH 5/8BSP MOCAL COOLERS ONLY.
OIL COOLERS AVAILABLE - PLEASE SEE OUR SHOP ITEMS. Black 5/8 ID high temperature/pressure oil hose. 2x 5/8bsp sandwich plate male/male adaptors.In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one 1/8nptf gauge port. The hose & fittings supplied is designed for self assembly.
Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it paramount that the correct Mocal (red band) fittings are used. It is reassuringly hard to fit the fittings to the hose: Dip the hose end in hot water, hold the fitting in a vice, apply WD40 (or similar) to the fitting & hose.Push the hose over the fitting in one quick action before it cools. Once assembled correctly the hose will have to be cut to remove the fitting. Hose clips need to be fitted in between the barbs of the fittings. The kit can be supplied with an extra 1 or 2 meters of hose. An amended invoice will then be sent. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model.
Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing.Most of our products are NOT designed for DIY fitting and in some cases instructions are not included - we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience.
The item "FORD ESCORT MK1 MK2 CAPRI OHC PINTO MOCAL 5/8BSP OIL COOLER FITTING KIT ZO5-3/4" is in sale since Tuesday, August 1, 2017. This item is in the category "Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers". The seller is "mattyzx" and is located in Dorking,Surrey. This item can be shipped worldwide.