Original Italian Made Dellorto Drla 48 Carburettors On Ford Ohc Pinto Engine

  

Here for sale is a pair of Italian made Dellorto DRLA 48'B' Carburettors on a Ford Pinto OHC Intake Manifold. These are Original, Italian made Dellorto DRLA 48'B' Carburettors, which we believe are designed by Dellorto for boosted/forced induction engine applications. The spindle bushings on these particular carburettors feature specially machined seal grooves, seal and star locking washers. The auxiliary venturi fuel passages are surrounded by specially machined o-ring grooves and o-ring seals.

The auxiliary venturi and choke venturi locking grub screws have fibre washer seals and special locking caps. The float chamber cover gaskets are of nitrile rubber construction. Although we have not tested these carburettors under pressure/boost, we are confident that they are designed by Dellorto to work under forced induction conditions. We have tested these carburettors on our naturally aspirated test engine, and they work beautifully, and are fully responsive to tuning adjustments, as expected. We made a considerable effort to get the throttle and balance levers to work harmoniously together in conjunction with the intake manifold spacing.

The levers are now fully adjustable for precise idle speed control, precise balancing of the 2 carburettors, and for accurate full throttle/closed throttle control. The intake manifold has a vacuum take off union for the brake servo hose, a coolant union for the coolant hose and an additional take-off point if required.

This additional take off point, we currently have blanked off with a grub screw, as shown in the photos. This can be unscrewed and a union can be screwed in it's place if required. This manifold also has the screw threads present to install a ford type throttle cable anchor/bracket, as seen here for classic ford type throttle cable. (bracket not included with the carbs but is available separately if required).

The carburettors have built-in vacuum take off unions (one per-barrel) which allow the use of a manometer type carburettor balancer, or you can use an airflow meter like the STE here. These carburettors feature an ignition distributor vacuum advance port for connecting the vacuum pipe on to. The carburettors are currently calibrated as follows. Chokes 40mm Emulsion tubes 9164.2 Main jets 180 Air corrector jets 200 Idle jets 60 Pump jets 33 Needle valves 2.25. We can re-calibrate these carburettors to suit your application or request - Please ask.

These are genuine, fully restored & tested, Italian Made Dellorto DRLA 48'B' Carburettors - They are beautiful and they are special. We can supply the manifold>cylinder head mounting gasket, trumpets & air filters, 12V Facet fuel pump, adjustable fuel pressure regulator, additional jets, emulsion tubes, air flow meter, and pretty much everything to help you get these carburettors installed, tuned and running on your engine, ready to use and enjoy! Please Note: These carburettors to do not have a choke/cold start enrichment mechanism feature.

Also Note: The deep socket used to prop-up the carburettor assembly for the purpose of taking clear photos, is not included.. Unless you really, really want it?? Feel free to ask any questions. We stock genuine WEBER & Dell'orto, carburettors and Parts, and general carburettor service kits and tools. You will find fuel pumps, throttle linkages, gasket & service kits, calibration jets and emulsion tubes, Inlet manifolds,'How-to books/manuals, air filters, trumpets, airflow meters, nuts & bolts and all the paraphernalia related to restoring & troubleshooting, classic cars & motorcycles.